Fujikura FSM-60R Fusion Splicer
Fujikura FSM-60R 12 Mass Fusion Splicer’s leading-edge features, including unprecedented size, weight, and ruggedness, make it the first core-alignment splicer truly optimized for field use, including FTTH applications. Automation such as calibration-free arc (with AUTO splice mode), automatic fiber identification and reduced operational steps, provides ease of use. In addition, the FSM-60R12 Mass offers increased flexibility with user selectable front or top monitor positioning. The FSM-60R12 Mass splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 mph cross winds.
Fujikura FSM-60R can handle a wide range of ribbon fibre types including single mode, multimode, dispersion and non-zero dispersion shifted fibre of core counts 1, 2, 4, 5, 6, 8, 10 and 12. The unit can examine and determine the fibre type loaded and can be operated by just closing the lid – no need to push a button. Cleave angle and shape of all cores are examined and estimated losses for each core are displayed after the jointing is complete. The unit also automatically stores splicing conditions and results.
New software included provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Fujikura FSM-60R Fusion Splicer Features:
- Excellent visibility in bright sunlight with 5.6″ TFT Color LCD display
- Up to 12-fiber ribbon splicing
- Automatic core to core, low-loss splicing regardless of fiber quality or age
- 9 second splicing time, 35 second heat time
- Wind protector design withstands 30 mph cross wind
- User selectable monitor position
- Multiple pre-programmed modes for specialized splicing
- Optional data download kit to connect splicer to PC
- Cladding alignment with fixed v-grooves
- Environmental resistant features
- Arc calibration-free system
- Dual directional operation system
- Long life battery.
Fujikura FSM-60R Fusion Splicer Specifications;
|Applicable type of fibers||SM TU-T G.652, MM TU-T G.651, DS TU -T G.653, NZDS TU-T G.655|
|Fiber count||Single, 2, 4, 5, 6, 8, 10 and 12|
|Applicable fiber dimensions||Ribbon : Cladding diameter 125um, Ribbon fiber thickness 0.25 to 0.4mm|
Single : Cladding diameter 125um, Coating diameter 250um and 900um
|Fiber cleaved length||10mm|
|Splicing modes||Total 100 modes|
|Typical splice loss||0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS.|
measured by cut-back method relevant to ITU-T standard.
|Splicing time||Typical 20sec. with standard SM TU-T G.652|
|Splice loss estimate||Available|
|Tube heater / heating time||Built-in tube heater with 30 heating modes. / Typical 40sec with Fujikura FP-04T and 50sec with FP-05.|
|Applicable protection sleeve||60mm, 40mm and Fujikura FPS01 series|
|Storage of splice result||The last 2000 results to be stored in the internal memory.|
|Tension test||1.96 to 2.25N|
|Operating condition||0 to 3660m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively.|
|Storage condition||0 to 95%RH and -40 to 80 degC respectively.|
Battery : -20 to 30 degC for long term.
|Dimensions||136W x 161D x 143Hmm excluding rubber foot.|
|Weight||2.1kg with AC adaptor ADC-13, 2.5kg with battery BTR-08.|
|Viewing method and display||Two CMOS cameras and 4.1″ color LCD monitor.|
|Fiber view and magnification||X / Y 35X magnification), or both X and Y simultaneously 35X magnification. Changeable 35X to 90X.|
|No.of splice cycles with battery||Typical 90 cycles splice / tube heat with BTR-08.|
|Power supply||Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08.|
|Electrode life||1000 arc-discharges|
|Terminals||USB 1.1 mini-B type connector for PC communication.|
6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply.
Fujikura FSM-60R Package
FSM-60R12 Fusion Splicer (machine only)
Includes: FH-50-12 Fiber Holders (pair), ADC-13 AC Adapter, ACC-14 AC Cord, Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case with Carrying Strap
FSM-60R12 Fusion Splicer Kit (with cleaver and stripper)
Includes: CT-30 Cleaver, HJS-02 Hot Jacket Stripper, FH-50-12 Fiber Holders (pair), ADC-13 AC Adapter, ACC-14 AC Cord, Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case with Carrying Strap
FSM-60R12 Fusion Splicer Kit (with cleaver, stripper, battery and cord)
Includes: CT-30 Cleaver, HJS-02 Hot Jacket Stripper, FH-50-12 Fiber Holders (pair), BTR-08 Battery, DCC-14 Battery Charge Cord, ADC-13 AC Adapter, ACC-14 AC Cord, Magnifier, JP-05 Splice Sleeve Cooling Tray, USB Cable, Splicer Carrying Strap, Spare Electrodes (pair), Quick Reference Guide, Video Instruction Manual, and Transit Case with Carrying Strap