Test and Measurements

How to select AFL OTDR

FOWIKI.comComments Off on How to select AFL OTDR
Share

OTDR Selection Guide

Family 　Model Pt-to-Pt Network / Fiber Type FTTx PON　 OTDR Performance　 Integrated Peripherals　　
MMF/SMF Data Ctr MMF/SMF LAN SMF Core SMF Dark SMF Live　 SMF Dark 　SMF live Wavelengths (nm) Dyn(dB)Range EDZ/ADZDeadzone(m)  OPM PON OLS OPM VFL
M&C-series MMF / SMF LAN / WAN OTDRs

 M310-25 √ √ √ √ √ √ 　 850/1300/1310/1550 30/30/38/37 0.8 / 2.5 　 √ √ √
M310-22 MMF MMF 　 　 　 　 　 850/1300 30/30 0.8 / 2.5 　 √ √ √
M310-20 SMF 　 √ √ √ √ 　 1310/1550 38/37 0.8 / 3 　 √ √ √
M710-40 　 　 √ √ √ 　 　 1310/1550 44/42 0.8 / 4 　 　 √ √
M700-25 　 √ 　 √ √ 　 　 850/1300/1310/1550 22/22/26/26 1.5 / 9 　 　 √ √
M700-24 √ √ √ √ √ 　 　 850/1300/1310/1550 24/24/39/37 0.8 / 4 　 　 √ √
M710-21 　 　 √ √ √ 　 　 1310/1550/1625 41/39/39 0.8 / 4 　 　 √ √
M710-20 　 　 √ √ √ 　 　 1310/1550 41/39 0.8 / 4 　 　 √ √
M210-25 　 √ 　 √ √ 　 　 850/1300/1310/1550 26/26/30/30 1.5 / 9 　 　 √ √
M210-22 　 MMF 　 　 　 　 　 850/1300 26/26 1.5 / 9 　 　 √ √
M210-20 　 　 　 √ √ 　 　 1310/1550 30/30 1.5 / 9 　 　 √ √
C850-100 　 √ 　 √ √ 　 　 850/1300/1310/1550 26/26/30/30 1.5 / 9 　 √ √ √
FlexTester SMF Telecom OTDRs

 FLX380-304 　 　 √ √ √ √ √ 1310/1550/1650 41/41/38 0.8 / 2.5 √ √ √ √
FLX380-303 　 　 √ √ √ √ √ 1310/1550/1625 41/41/38 0.8 / 2.5 √ √ √ √
FLX380-302 　 　 √ √ √ √ 　 1310/1490/1550 41/38/41 0.8 / 2.5 　 √ √ √
FLX380-300 　 　 √ √ √ √ 　 1310/1550 42/42 0.8 / 2.5 　 √ √ √
OFL280-103 　 　 　 √ √ √ √ 1310/1550/1625 34/32/30 0.8 / 3.5 √ √ √ √
OFL280-102 　 　 　 √ √ √ 　 1310/1490/1550 34/32/32 0.8 / 3.5 　 √ √ √
OFL280-101 　 　 　 √ √ √ 　 1310/1550/1625 34/32/30 0.8 / 3.5 　 √ √ √
OFL280-100 　 　 　 √ √ √ 　 1310/1550 34/32 0.8 / 3.5 　 √ √ √
CS260-10 　 　 　 √ √ √ √ 1625 filtered 35 0.8 / 3.5 √ 　 　 √
CS260-20 　 　 　 √ √ 　 　 1310/1550 30/30 0.8 / 3.5 　 　 　 √
FOWIKI.com
http://fowiki.com

Related Articles
Test and Measurements

OTDR Solución de problemas

FOWIKI.com

Issue Cause Solution The application displays a message indicating that it has found an event of “fiber end unresolved “. The fiber under test is too long. Make sure the length of the fiber under test is less than the  maximum length the OTDR can measure. A message indicating that there has been a “live […]
Test and Measurements

OTDR used in Fiber Optic Network Acceptance testing – 1

FOWIKI.com

OTDR used in Fiber Optic Acceptance testing – 1 Fiber optic acceptance testing ensures that any new cable matches the optical and physical requirements of the planned application. This testing should be performed upon delivery of the cable, prior to its installation. It is important that the operator knows the specifications in order to properly […]
Test and Measurements

Splice Loss Test Standards

FOWIKI.com

Standards relating to splice loss measurement methods and test equipment are summarized in Appendix B. Again, we identified a number of important gaps: TIA 455-34A, the most widely recognized and comprehensive standard, does not mention the geometry error or nominal tolerances for test fibers, e.g. core concentricity, which is specified in Telcordia GR-765. Neither standard addresses […]