Optical Fiber
Related Articles
Inspect and Clean High Density MPO/MTP Connector
Before you install the MTP/MPO connectors in the data center, it is essential that all the fiber end-faces and the ferrule are really clean. especially when you thinking about lining up 12, 16, 24 or 32 pieces of 9um fibers in one or two rows, it requires tremendous precision. Any dirts in the mix on […]
What is 5G, and when do I get it?
LOOK AT THE top corner of your phone screen. Right now, it probably reads 4G LTE, and you’re probably fine with that. But soon—and we’re talking years, not months—your phone will say 5G there instead. The mobile industry is buzzing about this next generation of high-speed wireless service, and you can expect the chatter to […]
Physical layer requirements of FTTH GPON Network
This section describe physical layer requirement for FTTH GPON network in three perspective, 1, Spectral Width,2. Attenuation Range, 3. ODN topology, etc. 1 Spectral width [ITU-T G.984.2] defines certain PMD specifications for the OLT and ONU. For a GPON system operating at 2488 Mbps downstream rate and 1244 Mbps upstream rate, the 20 dB spectral […]