FTTH Network

Development of passive optical networks (PONs)

PONs have attracted great attention in recent years, also from standardization bodies. Once again, the primary organizations are ITU-T and the IEEE (Institute of Electrical and Electronics Engineers). The latter defined the “Gigabit Ethernet Passive Optical Network (GEPON)” back in 2004 in the standard IEEE 802.3ah1. It is well known and established under the name […]

FTTH Network

Upgrading existing connection networks

The increased use of FO cabling is making broad band infrastructure a reality in business and residential districts. This cabling addresses the demand from customers for ever more band width with efficient networks while protecting the investment to the greatest possible extent. Network operators almost always take a two-prong approach to connection networks. Cable network […]

FTTH Network

Outside Plant (OSP) Design

The designer of the fiber network designs and digitizes fiber features using the standard G/Technology feature placement workflow and a fiber splicing editor. The end-to-end workflow is as follows. At a given location (central office, switching center), the user creates an ISP Connect feature. From this feature, the user places fiber cables, splices, remote terminals, […]

Test and Measurements

Measuring Bandwidth of 10G Laser-optimized Multimode Fiber

1. The traditional Overfilled Launch (OFL) method of measuring bandwidth in multimode fiber has been replaced by new, more advanced techniques. The advent of 850 nm VCSEL light sources and 10G laser-optimized 50 µm multimode (OM3) fiber has enabled cost-effective 10G transmission for short reach enterprise applications. Unlike LEDs, VCSELs don’t light up the entire […]

Data Center

What is the difference of MTP connectors and MPO connectors

The MPO connector is defined by IEC-61754-76, it is a multiple fiber core connector, “Fibre optic interconnecting devices and passive components – Fiber optic connector interfaces – Part 7: Type MPO connector family”; and TIA-604-5-D, ”Fiber Optic Connector Intermateability Standard, Type MPO”. The term MTP is a registered trademark of US Conec. This is the […]

FTTH Network

10G EPON optical transceivers drive FTTP applications

GPON and 10G EPON optical transceivers for fiber to the premise (FTTP) or FTTH Fiber to the home applications to its Passport line of universal transceivers. For GPON, SFP transceivers for both OLT (optical line terminal) and ONT/ONU (optical network terminal/Optical Network Unit) interfaces. there are also 10G EPON via both SFP+ and XFP transceivers; the SFP+ […]

FTTH Network

MPO connectors are ready for prime time

As the industry deploys 40-Gbit/sec optical networks and moves ahead to 100-Gbit/sec data rates, service providers and data center managers may question whether the multi-fiber push-on (MPO) connector can perform reliably at those speeds. They saw the first-generation MPO as a “weak link” in optical networking, primarily because of its higher optical loss, lack of […]

Data Center

Higher Data Center operational temperature affect fiber optic reliability

Big Data Analytics, The Cloud, Internet of Thing: The buzz words in the ICT (Information and Communications Technology) industry. All of which fuels the flourishing Data Centers market across the globe at an alarming rate. Cisco predicted that by 2018, more than three quarters (78%) of workloads will be processed by cloud data centers; 22 […]

Data Center

Fast field terminate MPO connectors

Currently Data center required everywhere for big data. Many manufacturer all start to demonstrate the tools and procedures by which installation technicians can field-terminate MPO-style fiber connectors. MPO fusion-spliced, field-terminated connectors feature just six components. With a factory prepolished ferrule, their field-termination process eliminates polishing, adhesives and crimping in the field, minimizing the potential for […]

Data Center

OM4 Plus fiber system enables 300 meters of 40/100G

Recently an end-to-end OM4 Plus solution for data centers “designed to push 40/100G fiber signals up to 300 meters meet the market, it is one of the first premium OM4 Plus solutions in the industry, The data center solutions offers premium trunk cables, harnesses, patch cords, MTP cassettes and adapter plates in violet (purple) to […]