PPM-350C Troubleshooting The PPM-350C PON Power Meter was designed for two main purposes: Suit FTTP testing needs and to be easy to use for people who are not necessarily familiar with fiber optics in FTTx. Be used as a standard optical power meter (OPM operation mode). Solving Common Problems Problem Possible Cause Solution One of […]
Day: March 30, 2015
JDSU Light Source Maintenance
Before you start to maintenance Light Source, read the following words thoroughly: Maintenance or cleaning of the device when it is connected up or operating may damage the device or injure you. Make sure that the device is switched off and disconnected from all power sources and optical radiation sources before maintenance or cleaning. The […]
CWDM OTDR JDSU MTS-6000A and -8000 Platforms
CWDM OTDR Module Introduction This JDSU CWDM OTDR module, support to work with JDSU MTS-6000A and JDSU MTS-800 platform. This CWDM OTDR EVO family able to characterize CWDM fiber network by connecting to any location of the fiber networking, during CWDM network commissioning, network upgrades, and troubleshooting. The optical performance of the CWDM module, combined […]
EXFO Power Meter Calibration
Power Meter Calibration Introduction When it comes to calibration, it is not enough to state that an instrument complies with published specifications; it is necessary to be ready to prove it and to have a state-of-the-art system in place to monitor and preserve the quality of all calibrations. In 1998, EXFO decided to adopt the […]