The following is a comparison table among Fujikura FSM-70S+/FSM-80S+, Sumitomo Type-72C, Fitel S179A and INNO View 7 Fusion Splicers. Manufacturer FUJIKURA SUMITOMO FITEL INNO Model No. FSM-70S+ TYPE-72C S179A View 7 Splicing Method Core Alignment Core Alignment Core Alignment Core Alignment Applicable Fibers SM(G. 652/657) MM(G.651) DS(G. 653) NZDS(G. 655) SM(G. 652/657) MM(G.651) DS(G. 653) […]
Fiber Splicing
TARLUZ FTTH Handheld Fusion Splicer
TL-S5 Handheld Fusion Splicer is specially designed for FTTH fiber to the home network, it designed with compact size, light weight, excellent splicing performance, it is the splice mate for the field engineer to complete splicing task for internet installation. Features ¬ Used for FTTH and ordinary fiber project ¬ Core to core alignment by […]
فیوژن کردن فیبر نوری
فیوژن فیبر نوری عمل اتصال یا در اصطلاح جوش دادن دو کابل فیبر نوری به یکدیگر می باشد که توسط دستگاه فیوژن فیبر نوری انجام می شود. اتصال فیوژن از جرقه الکتریکی برای جوش دو کابل فیبر نوری به هم استفاده می کند. این فرایند از جوش فیبر نوری شامل حرارت موضعی دو کابل فیبر […]
TL-7S FTTH Сварочный аппарат для оптоволокна
TL-7S FTTH Сварочный аппарат для оптоволокна Сварочный аппарат TL-7S является экономичным аппаратом высокого качества, специально разработанный для высокоточного оптоволокна FTTH. Среднее значение потерь 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), технология PAS обеспечивает точное сведение и низкие потери, технология формирования сигналов изображений CMOS. Кейс тоже выполняет функцию рабочей платформы. С надежным качеством и умной внешней формы, аппарат TL-7S […]
TL-8S FTTH Fusion Splicer
TL-8S FTTH Fusion Splicer TL-8S Optical Fusion Splicer is a high precision instrument specially designed for fiber optic network. This splicer is core to core alignment by PAS technology, beside it, the splicer with large capacity li battery, support over 300 splice times. The Splicer with compact, durable, flexible features is an ideal tool for […]
TARLUZ TL-7S Fusion Splicer
TL-7S Optical Fusion Splicer is a cost effective high precision instrument specially designed for FTTH network. The splicer average splicing loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), PAS fiber core alignment technology, CMOS image sensor imaging technology, Carrying bag also your work platform. It with compact, durable, flexible features is an ideal tool for fiber optic network […]
Fujikura Launched new Cleaver CT-101 and CT-102
CT-101 and CT-102 Fiber Cleavers are equipped with a diamond blade support mechanized operation, the cladding diameter can be cut from 80 to 250um fiber. Also includes a controllable tension adjustment angle of 0-15 degrees of cutting, cutting the number counting, 3mm to 40mm cutting length control, and to provide a battery or AC power […]
Fujikura 62S, 61S Fusion Splicer
The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink […]
Arc Fusion Splicing of Photonic Crystal Fibres
Arc fusion splicing is an established method for joining optical fibres in communication networks, ensuring splice loss down to 0.05 dB and excellent reliability. Telecom fibres are covered by IEC 60793 and ITU-T G.651.1-G.657 standards, with common material (fused silica) and cladding size (125 μm). Splicing equipment for these fibres is widely available. Fusion splicing […]
Splice loss increase: Reason and solution
Note: A vertical line sometimes appears at the splice point when MM fibers, or dissimilar fibers (different diameters) are spliced. This does not affect splice quality, such as splice loss or tensile strength.