I. Preparing 1) Verify that the machine is plugged in power or the battery capacity is enough; then press and hold the key until TL-7S fusion splicer booted. 2) In the standby mode, press to enter “Splice Menu” menu. Move the cursor to [Operation Options]; press to enter. Set [Auto Start] [pause 1], [pause 2] […]
Tag: Welding Machine
TL-8S FTTH Fusion Splicer
TL-8S FTTH Fusion Splicer TL-8S Optical Fusion Splicer is a high precision instrument specially designed for fiber optic network. This splicer is core to core alignment by PAS technology, beside it, the splicer with large capacity li battery, support over 300 splice times. The Splicer with compact, durable, flexible features is an ideal tool for […]
TARLUZ TL-7S Fusion Splicer
TL-7S Optical Fusion Splicer is a cost effective high precision instrument specially designed for FTTH network. The splicer average splicing loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), PAS fiber core alignment technology, CMOS image sensor imaging technology, Carrying bag also your work platform. It with compact, durable, flexible features is an ideal tool for fiber optic network […]
Splice loss increase: Reason and solution
Note: A vertical line sometimes appears at the splice point when MM fibers, or dissimilar fibers (different diameters) are spliced. This does not affect splice quality, such as splice loss or tensile strength.
How to splice fiber by Inno IFS-10 Fusion Splicer
How to splice fiber optic cable This section is a detailed introduction about how to splice two fibers together to become a single core fiber. the instruction divided into several section, please refer the list as follow: 1. Preparing the splicer 2. Preparing the fiber 3. How to make a splice 4. How to check […]
How to choose Fusion Splicer
How to choose a fiber optic fusion splicer (welding machine, or splicing machine) Background Since optical fiber start for business application in mid 1980s, its about 30 years now. people right now adequate to the benefits of it. and it is widely used worldwide, no matter in developed country or developing country, however, it is […]
Fujikura FSM-70R Rribbon Fusion Splicer
Fujikura FSM-70R Mass Fiber Fusion Splicer The Fujikura 70R is a fully robust fusion splicer for ribbon optical fibre. The new design streamlines the steps required to complete splices, resulting in greater productivity. The ‘configurable automation’ features allow you to customise the operation of the machine to best suit your particular splicing technique and process. […]
Fujikura FSM-80S, 80S Fusion Splicer
Fujikura FSM-80S Fusion Splicer Introduction FSM-80S is core-to-core alignment single fiber splicer succeeding to 60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as “Automated wind-protector and tube-heater” for quicker splicing cycle as well as fewer operation steps, “innovative carrying-case design” for quicker preparation, “powerful Li-ion […]
Fujikura FSM-60R Fusion Splicer
Fujikura FSM-60R Fusion Splicer Fujikura FSM-60R 12 Mass Fusion Splicer’s leading-edge features, including unprecedented size, weight, and ruggedness, make it the first core-alignment splicer truly optimized for field use, including FTTH applications. Automation such as calibration-free arc (with AUTO splice mode), automatic fiber identification and reduced operational steps, provides ease of use. In addition, the […]
Fujikura FSM-60S Fusion Splicer
Fujikura FSM-60S Fusion Splicer Introduction The Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, What dust, and rain, and can […]