CT-101 and CT-102 Fiber Cleavers are equipped with a diamond blade support mechanized operation, the cladding diameter can be cut from 80 to 250um fiber. Also includes a controllable tension adjustment angle of 0-15 degrees of cutting, cutting the number counting, 3mm to 40mm cutting length control, and to provide a battery or AC power […]
Tag: Fujikura
Fujikura 62S, 61S Fusion Splicer
The Fujikura 62S provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink […]
Maintenance of FSM-11S SpliceMate Splicing Quality
Maintenance of Splicing Quality 1. Cleaning and Checking before Splicing Critical cleaning points and maintenance checks are described below . 1-1. Arc Power Calibration Refer to [Arc Calibration] (Page 42). 1-2. Cleaning V -grooves If contaminants are present in the V -grooves, proper clamping may not occur, resulting in higher splice loss. The V -grooves […]
Fujikura FSM-70R Rribbon Fusion Splicer
Fujikura FSM-70R Mass Fiber Fusion Splicer The Fujikura 70R is a fully robust fusion splicer for ribbon optical fibre. The new design streamlines the steps required to complete splices, resulting in greater productivity. The ‘configurable automation’ features allow you to customise the operation of the machine to best suit your particular splicing technique and process. […]
Fujikura FSM-80S, 80S Fusion Splicer
Fujikura FSM-80S Fusion Splicer Introduction FSM-80S is core-to-core alignment single fiber splicer succeeding to 60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as “Automated wind-protector and tube-heater” for quicker splicing cycle as well as fewer operation steps, “innovative carrying-case design” for quicker preparation, “powerful Li-ion […]
Fujikura FSM-60R Fusion Splicer
Fujikura FSM-60R Fusion Splicer Fujikura FSM-60R 12 Mass Fusion Splicer’s leading-edge features, including unprecedented size, weight, and ruggedness, make it the first core-alignment splicer truly optimized for field use, including FTTH applications. Automation such as calibration-free arc (with AUTO splice mode), automatic fiber identification and reduced operational steps, provides ease of use. In addition, the […]
Fujikura FSM-60S Fusion Splicer
Fujikura FSM-60S Fusion Splicer Introduction The Fujikura FSM-60S fusion splicer sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, What dust, and rain, and can […]