PoE is short for Power Over Ethernet, is a methods of carrying both data and power to a device over copper cable. This is accomplished by running a twisted-pair copper cable, such as a Category 5 cable, from a device to a mid-span or endpoint, where the cable can be connectorized using standard RJ-45 or similar modular connectors. […]
TL-8S FTTH Fusion Splicer
TL-8S FTTH Fusion Splicer TL-8S Optical Fusion Splicer is a high precision instrument specially designed for fiber optic network. This splicer is core to core alignment by PAS technology, beside it, the splicer with large capacity li battery, support over 300 splice times. The Splicer with compact, durable, flexible features is an ideal tool for […]
TARLUZ TL-7S Fusion Splicer
TL-7S Optical Fusion Splicer is a cost effective high precision instrument specially designed for FTTH network. The splicer average splicing loss 0.02dB(SM) 0.01dB(MM) 0.04dB(DS) 0.04dB(NZDS), PAS fiber core alignment technology, CMOS image sensor imaging technology, Carrying bag also your work platform. It with compact, durable, flexible features is an ideal tool for fiber optic network […]
400 Gbps Data center driven deployments coming in 2017/2018: Heavy Reading
The falling price of 100-Gbps connections within the data center, growth in I/O bandwidth requirements per rack, and a new generation of component technology should combine to drive 400-Gbps optical communications into the field in the 2017/2018 timeframe, says Heavy Reading. The market research firm states in its newly released “400G Components Come Out of […]
TIA standard for wideband multimode fiber, WBMMF, approved
At its June 2016 meeting, the Telecommunications Industry Association’s (TIA) TR-42.12 Optical Fibers and Cables Subcommittee approved the standard ANSI/TIA-492AAAE, which specifies wideband multimode fiber (WBMMF). The specification completed the entire TIA standard-development process in under two years; TR-42 accepted the project request for the standard in October 2014. An article authored by Cindy Montstream, […]
Fujikura Launched new Cleaver CT-101 and CT-102
CT-101 and CT-102 Fiber Cleavers are equipped with a diamond blade support mechanized operation, the cladding diameter can be cut from 80 to 250um fiber. Also includes a controllable tension adjustment angle of 0-15 degrees of cutting, cutting the number counting, 3mm to 40mm cutting length control, and to provide a battery or AC power […]
CONTAMINACIÓN DEL CONECTOR ÓPTICO
¿Qué dicen las normas? Los métodos de prueba especificados en 568-C necesitan herramientas y procedimientos para garantizar la calidad del conector. Los extremos de los cordones y los troncos se harán conforme a la norma CEI 6100-3-35. Utilice un microscopio que sea compatible con la norma CEI 61300-3-35 El microscopio debe utilizar adaptadores que sean […]
Introduction to fiber coating
In General, fiber coating consists of primary coating, secondary or buffer coating, fiber identification, removability of coating. 1 Primary coating Silica fiber itself has an intrinsically high strength, however surface flaws reduce its strength. A primary coating must therefore be applied immediately after drawing the fiber to size. The optical fiber should be proof-tested. In […]
Google Launches Submarine Cable Between Japan and U.S.
Google and an association of telecom providers have announced that the FASTER broadband cable system that links Japan and the United States is now complete. The system is the fastest of its kind and stretches nearly 9,000 km across the bottom of the Pacific Ocean, starting in Oregon and ending in two landing spots in […]
What is TIP (Telecom Infra Project)?
The Telecom Infra Project (TIP) is an engineering-focused initiative driven by operators, infrastructure providers, system integrators, and other technology companies that aim to reimagine the traditional approach to building and deploying telecom network infrastructure. Current Projects TIP now shared the fist set of technical projects and the chairs. The projects covering three aspects: Access, Back haul […]